Velocitek OVF 300 – Immediate success on Closed Loop Chilled Water systems

Immediate results on a Closed Loop Chilled Water system with the Velocitek OVF 300

When a local Brewery contacted us regarding issues they were having with rust and fine particles within their process water, we had just the solution – our Velocitek OVF 300, pictured below. Rated to 4.5m3/hr and filtering to less than 1 micron, as you can see, the immediate results speak for themselves!

 

 

 

 

 

 

 

 

This client is currently investing in a new chiller system and had concerns about the current condition of the water going through the new chiller. During discussions, their initial objective was to clean up the process water before the new chiller system was installed, so that the dirty water seen in the sample above, wasn’t going into the new chiller.

The Solution:

First, the Velocitek OVF 300 trail unit was installed onto the existing “old” system to remove fine particles from the water before the new chiller was installed.

However, it soon became apparent, that after the Velocitek trial unit was removed, the clean water in the process would soon turn “dirty” again very quickly, so a more long-term solution was required.  This could be easily achieved with a small-footprint permanently installed Velocitek OVF system.

Other benefits of side-stream filtration on closed loop chilled water systems include: –

  • Control of suspended solids reducing component wear and potential damage.
  • Removal of solids build-up with pipework and components maintaining optimal system efficiency and heat transfer.
  • Reduction in system maintenance costs and downtime for system repair.
  • Reduction in water use as lower requirement for system flushes and cleaning

 

The Velocitek OVF 300 will prove successful in all manufacturing applications where chilled water is required in the process. We have a wide range of models and sizes, with varying filtration grades and suitable for larger flow rates.

Want to discuss how we can clean up your system? Call 0151 420 4630 or email – enquiries@hydro-genengineeering.co.uk

 

To find out more about improving your process and reducing costs, visit our website www.hydro-genengineering.co.uk  for our full range of products. Or contact us on 0151 420 4630 and we will be happy to discuss your system requirements.